Blade Break Arm Removal (continued)
Deck: Service and Repairs
6. Remove the 4 (1/4–20 inch) taptite screws securing the belt cover to the
frame.
g296175
7. Rotate the belt tensioner arm by using a 7/16 inch socket on the nut at the
bottom side of the transmission, turning clockwise.
g302330
8. To remove belt tension, align the idler pulley with the access hole on the
bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley
slot securing the pulley into position.
Figure 337
Figure 338
Page 7–84
30 Inch TurfMaster® HDX WPM
3432-730 Rev A