Deck Installation (continued)
Height-of-Cut Replacement
Height-of-Cut Removal
Deck: Service and Repairs
g296174
26. Lower the rear cover.
27. Using an appropriate lifting device, lower the rear of the machine to the
ground.
1. Park the machine on a level surface and engage the parking brake. Stop the
engine and wait for all moving parts to stop. Shut the fuel off.
2. Remove the grass bagger assembly if attached.
3. Using an appropriate lifting device, raise the rear of the machine off the
ground.
4. Open and secure the rear cover.
5. Remove the 1/4–20 inch taptite screw securing the cover to the frame.
Figure 222
Page 7–26
30 Inch TurfMaster® HDX WPM
3432-730 Rev A