Table of Contents
Advertisement
Blade Drive Assembly Installation (continued)
Deck: Service and Repairs
g302331
19. Install the transmission belt to the transmission pulley.
20. Using a 7/16 inch socket on the bottom of the transmission, release pressure
on the quarter inch screw driver. Remove the quarter inch screw driver,
allowing idler arm to put tension on the belt.
21. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque screws to 55 ± 5 in-lbs. (6 ± 1 Nm).
g296175
22. Install the 1/4–20 inch taptite screw securing the frame cover to the frame.
Torque bolt to 110 ± 11 in-lbs. (12 ± 2 Nm).
Figure 321
Figure 322
Page 7–76
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
Advertisement
Chapters
Table of Contents
