Toro TurfMaster HDX 22215 Service Manual page 109

BBC Belt Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302331
9. Install the transmission belt to the transmission pulley.
10. Using a 7/16 inch nut on the bottom of the transmission, release pressure on
the quarter inch screw driver. Remove the quarter inch screw driver, allowing
idler arm to put tension on the belt.
11. Reinstall the cable guide.
12. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque bolts to 55 ± 5 in-lbs. (6 ± 1 Nm).
g296175
Figure 148
Figure 149
Page 6–11 Belts: Service and Repairs