Toro TurfMaster HDX 22215 Service Manual page 220

Blade Break Arm Installation (continued)
Deck: Service and Repairs
g302385
12. Secure the topside of the bolt with a 1/2 inch wrench. Torque nut and bolt to
200 ± 20 in-lbs. (22 ± 2 Nm).
Note: Access bottom nut from front of the machine.
13. Install the belt guide. Install the 2 (1/4–20 inch) taptite screws securing the
front BBC belt guide to the bosses on the frame. Torque screws to 110 ± 11
in-lbs. (12 ± 2 Nm).
g296179
14. Install the belt to the rear of the mower.
15. Install the transmission belt to the engine pulley.
Note: Access belt/engine pulley from the front of the mower.
Figure 356
Figure 357
Page 7–94 30 Inch TurfMaster® HDX WPM
3432-730 Rev A