Toro TurfMaster HDX 22215 Service Manual page 36

Engine Installation (continued)
Engine: Service and Repairs
g302331
11. Install the transmission belt to the transmission pulley.
12. Using a 7/16 inch nut on the bottom of the transmission, release pressure on
the quarter inch screw driver. Remove the quarter inch screw driver, allowing
idler arm to put tension on the belt.
13. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque screws to 55 ± 5 in-lbs. (6 ± 1 Nm).
g296175
14. Install the 1/4–20 inch taptite screw securing the frame cover to the frame.
Torque screw to 110 ± 11 in -lbs. (12 ± 2 Nm).
Figure 19
Figure 20
Page 4–12 30 Inch TurfMaster® HDX WPM
3432-730 Rev A