BBC Belt Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
7. Rotate the belt tensioner arm by turning the 7/16 inch nut on the bottom
side of the transmission clockwise.
g302330
8. Align the idler pulley with the access hole on the bottom side of the
transmission to remove the belt tension. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley slot
securing the arm/pulley into position.
g296176
9. Remove the transmission belt from the engine pulley.
Note: Access belt from the front of the mower.
Figure 136
Figure 137
Page 6–5
Belts: Service and Repairs