Toro TurfMaster HDX 22215 Service Manual page 92

Handle Removal (continued)
Handle Installation
Controls: Service and Repairs
g298491
14. Remove handle assembly from the machine.
g298492
1. Install the handle assembly to the machine.
2. Install the 5/16–18 inch bolt/nuts to carriage bolt and 4 (2 per side) bolts with
captured nuts. Torque nuts to 80 ± 10 in-lbs. (9 ± 1 Nm). Torque bolt to
frame to 300 ± 30 in-lbs. (34 ± 3 Nm).
Figure 122
Figure 123
Page 5–48 30 Inch TurfMaster® HDX WPM
3432-730 Rev A