Toro TurfMaster HDX 22215 Service Manual page 182

Front Bumper Removal (continued)
Front Bumper Disassembly
Deck: Service and Repairs
g298858
1. Roll the front bumper assembly over.
2. Using a 9/16 inch socket and wrench, remove 3/8–16 inch nut from 3/8–16
inch bolt securing the front wheels to the axle.
g298895
3. Remove the 4 (1/4–20 inch) bolts to captured nuts on the two piece axle
bushings.
Note: Remove the 2 furthest forward bolts first.
Figure 281
Figure 282
Page 7–56 30 Inch TurfMaster® HDX WPM
3432-730 Rev A