Toro TurfMaster HDX 22215 Service Manual page 83

Brake Cable Removal (continued)
Brake Cable Installation
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302936
10. Remove the brake cable up through the main frame access hole.
1. Thread brake cable through the main frame access hole.
2. Set cable length to 7–1/8 inch from cable clamp to end cable. Install the 5
mm Allen head bolt securing the cable to the caliper. Torque bolt to 43 in-lbs.
(5 ± 1 Nm).
g302936
3. Install the brake caliper.
4. Install the 1/4–20 inch screw securing the parking brake to the transmission.
Torque bolt to 85 ± 15 ft-lbs. (10 ± 2 Nm).
Figure 104
Figure 105
Page 5–39 Controls: Service and Repairs