Toro TurfMaster HDX 22215 Service Manual page 59

Traction Cable Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302330
10. To remove belt tension, align the idler pulley with the access hole on the
bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley
slot securing the pulley into position.
g296176
11. Remove the transmission belt from the engine pulley.
Note: Access belt from the front of the mower.
Figure 56
Figure 57
Page 5–15 Controls: Service and Repairs