Toro TurfMaster HDX 22215 Service Manual page 178

Height-of-Cut Installation (continued)
Deck: Service and Repairs
g297058
24. Install the mulch plug to the rear discharge.
25. Install the T-30 screw securing the dust cover to the axle assembly. Torque
screw to 55 ± 5 in-lbs. (6 ± 1 Nm).
g297057
26. Using a socket, install the 2 (3/8–16 inch) nuts securing the wheels to the
rear axles. Torque nuts to 180 ± 20 in-lbs. (20 ± 2 Nm).
27. Install the belt through the rear of the mower.
Figure 273
Figure 274
Page 7–52 30 Inch TurfMaster® HDX WPM
3432-730 Rev A