Toro TurfMaster HDX 22215 Service Manual page 155

Height-of-Cut Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302331
10. Remove the belt from the rear of the mower.
g296178
11. Using an appropriate lifting device, lower the rear of the machine onto the
ground.
12. Set the rear height-of-cut to 5 inch.
13. Using a 9/16 inch socket, remove the 2 nuts securing the wheels to the rear
axles.
14. Remove the T-30 screw securing the dust cover to the axle assembly.
Figure 227
Figure 228
Page 7–29 Deck: Service and Repairs