Engine Removal (continued)
Engine: Service and Repairs
7. Rotate the belt tensioner arm by turning the 7/16 inch nut on the bottom
side of the transmission clockwise.
g302330
8. Remove the belt tension by aligning the idler pulley with the access hole on
the bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley
slot securing the pulley into position.
g296176
9. Remove the transmission belt from the engine pulley.
Note: Access belt from the front of the mower.
Figure 7
Figure 8
Page 4–6
30 Inch TurfMaster® HDX WPM
3432-730 Rev A