Toro TurfMaster HDX 22215 Service Manual page 190

Blade Drive Assembly Removal (continued)
Deck: Service and Repairs
6. Remove the 4 (1/4–20 inch) taptite screws securing the front cover to the
frame.
g296175
7. Rotate the belt tensioner arm by using a 7/16 inch socket on the nut at the
bottom side of the transmission, turning clockwise.
g302330
8. To remove belt tension, align the idler pulley with the access hole on the
bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley
slot securing the pulley into position.
Figure 297
Figure 298
Page 7–64 30 Inch TurfMaster® HDX WPM
3432-730 Rev A