Toro TurfMaster HDX 22215 Service Manual page 185

Front Bumper Disassembly (continued)
Front Bumper Assembly
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g298900
11. Squeeze the height-of-cut/lockout lever and remove the 5/16–18 inch bolt
from the front bumper assembly.
1. Place the spring onto the front bumper assembly. Loosely install the 3/16
inch allen head screw.
g298901
2. Install the axle weldment onto the front bumper assembly.
3. Place one end of the spring onto the axle weldment, install the mandrell, and
then place the opposite end of the spring onto the axle weldment.
Figure 287
Figure 288
Page 7–59 Deck: Service and Repairs