Toro TurfMaster HDX 22215 Service Manual page 39

Fuel Tank Removal (continued)
Fuel Tank Inspection
Fuel Tank Installation
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g296197
9. Remove the fuel tank mounting from the engine.
Shake or tap the fuel tank to listen for audible rattle of the check ball in the tank
vent.
1. Install the fuel tank mounting to the engine.
2. Install the 3 (M6x1) screws on the Kawasaki engine securing the fuel tank
mounting bracket to the engine assembly. Torque screws to 65 ± 5 in-lbs.
(7 ± 1 Nm). For the Kohler engine install the 1 (M6x1) and 2 (3/8–16x3/4)
screws. Torque M6x1 screw to 65 ± 5 in-lbs. (7 ± 1 Nm). Torque 3/8–16x3/4
screws to 200 ± 20 in-lbs. (22 ± 2 Nm).
Figure 24
Page 4–15 Engine: Service and Repairs