Toro TurfMaster HDX 22215 Service Manual page 186

Front Bumper Assembly (continued)
Deck: Service and Repairs
g298929
4. Tighten the 3/16 inch Allen head screw. Torque to 140 ± 15 in-lbs. (15.8 ±
1.7 Nm).
g298930
5. Roll the front bumper assembly over.
6. Squeeze the lever and rotate the front axle height-of-cut until aligned with
the 5 inch mark.
Figure 289
Figure 290
Page 7–60 30 Inch TurfMaster® HDX WPM
3432-730 Rev A