Toro TurfMaster HDX 22215 Service Manual page 121

Engine Pulley Belt Guide Removal (continued)
Engine Pulley Belt Guide Installation
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g296180
17. Remove the belt guide.
18. Replace engine pulley belt guide.
1. Using a 6 inch long, quarter inch drive extension and a 1/2 inch deep well
socket, put the extension in the access hole with socket off. Then from the
back side reinstall the socket to extension (hole is only large enough for
extension). Place the socket on top of the extension on the top of the deck
g296180
2. Install the 2 (1/4–20 inch) taptite screws securing the belt guide and guide to
the machine. Torque 80 ± 10 in-lbs. (9 ± 1 Nm).
Figure 170
Figure 171
Page 6–23 Belts: Service and Repairs