Toro TurfMaster HDX 22215 Service Manual page 179

Height-of-Cut Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g296178
28. Install the transmission belt to the engine pulley.
Note: Access belt from the front of the mower.
g296177
29. Install the transmission belt to the transmission pulley.
30. Using a 7/16 inch socket on the bottom of the transmission, release pressure
on the quarter inch screw driver. Remove the quarter inch screw driver,
allowing idler arm to put tension on the belt.
31. Install the belt to the input pulley on the transmission.
32. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque bolts to 55 ± 5 in-lbs. (6 ± 1 Nm).
Figure 275
Figure 276
Page 7–53 Deck: Service and Repairs