Toro TurfMaster HDX 22215 Service Manual page 217

Blade Break Arm Removal (continued)
Blade Break Arm Disassembly
Blade Break Arm Assembly
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302428
26. Remove the brake extension spring from the engine deck mount.
27. Remove the BBC cable spring from the brake idler arm.
28. Remove the brake extension spring from the brake idler arm.
Remove the 7/16 inch nut and bolt securing the idler pulley from brake idler arm.
g299121
Install the 7/16 inch nut and bolt securing the idler pulley to the brake idler arm.
Torque nut and bolt to 100 ± 15 in-lbs. (11.3 ± 1.7 Nm).
Figure 351
Figure 352
Page 7–91 Deck: Service and Repairs