Toro TurfMaster HDX 22215 Service Manual page 173

Height-of-Cut Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g297896
15. Slide the RH side of the height-of-cut weldment first before the LH side.
Install the height-of-cut weldment to the chassis.
g297895
16. Line up the RH side height-of-cut notch with bolt. Slide the transmission to
the left.
Figure 263
Figure 264
Page 7–47 Deck: Service and Repairs