Toro TurfMaster HDX 22215 Service Manual page 123

Engine Pulley Belt Guide Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302385
7. Tighten the ½ inch nylock nut to the BBC idler arm pivot. Secure the topside
of the bolt with a ½ inch wrench. Torque nut and bolt to 200 ± 20 in-lbs.
(22 ± 2 Nm).
8. Install the belt guide. Install the 2 (1/4–20 inch) taptite screws securing the
front BBC belt guide to the bosses on the frame. Torque bolts to 110 ± 11
in-lbs. (12 ± 2 Nm).
g296179
9. Install the transmission belt to through rear of the mower.
10. Install the transmission belt to the engine pulley.
Note: Access belt/engine pulley from the front of the mower.
Figure 174
Figure 175
Page 6–25 Belts: Service and Repairs