Table of Contents
Advertisement
Door and Chute Assembly Installation (continued)
Blade Break Arm Replacement
Blade Break Arm Removal
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g296175
1. Park the machine on a level surface and engage the parking brake. Stop the
engine and wait for all moving parts to stop. Shut the fuel off.
2. Remove the grass bagger assembly if attached.
3. Using an appropriate lifting device, raise the rear of the machine off the
ground.
4. Open and secure the rear cover.
5. Remove the 1/4–20 inch taptite screw securing the frame cover to the frame.
g296174
Figure 335
Figure 336
Page 7–83
Deck: Service and Repairs
Advertisement
Chapters
Table of Contents
