Toro TurfMaster HDX 22215 Service Manual page 198

Blade Drive Assembly Installation (continued)
Deck: Service and Repairs
g298546
3. Install the 2 sprocket pulleys and BBC pulley to the spindle assembly.
4. Loosely install the 1/2–20 inch nuts to spindle shaft.
5. Install the 2 (1/4–20 inch) shoulder bolts securing the tension idler bracket to
the frame. Torque bolts to 110 ± 11 in-lbs. (12 ± 2 Nm).
g298545
6. Install the blade timing belt to the spindle pulleys.
Note: Blades need to be timed 90 degrees apart.
7. Install the 5/16–18 inch bolt securing the fixed idler pulley to the frame.
Torque bolt to 160 ± 16 in-lbs. (18 ± 2 Nm).
Figure 313
Figure 314
Page 7–72 30 Inch TurfMaster® HDX WPM
3432-730 Rev A