Toro TurfMaster HDX 22215 Service Manual page 78

Traction Cable Installation (continued)
Controls: Service and Repairs
g296178
21. Install the transmission belt to the engine pulley.
Note: Access belt from the front of the mower.
g302331
22. Install the transmission belt to the transmission pulley.
23. Using a 7/16 inch nut on the bottom of the transmission, release pressure on
the quarter inch screw driver. Remove the quarter inch screw driver, allowing
idler arm to put tension on the belt.
24. Install the cable. Install the shoulder bolt and nut securing the cable to the
traction bail. Torque shoulder bolt and nut to 75 ± 5 in-lbs. (8 ± 1 Nm).
Figure 94
Figure 95
Page 5–34 30 Inch TurfMaster® HDX WPM
3432-730 Rev A