Toro TurfMaster HDX 22215 Service Manual page 62

Traction Cable Removal (continued)
Controls: Service and Repairs
g297059
20. Remove the 5/16–18 inch bolt securing the axle bearing housing to the axle
height-of-cut plate.
g297060
21. While holding up the spring loaded height-of-cut handle, apply pressure to the
back of the axle bearing housing assembly, separating from axle weldment.
Figure 62
Figure 63
Page 5–18 30 Inch TurfMaster® HDX WPM
3432-730 Rev A