Toro TurfMaster HDX 22215 Service Manual page 151

Deck Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302331
22. Install the transmission belt to the transmission pulley.
23. Using a 7/16 inch socket on the bottom of the transmission, release pressure
on the quarter inch screw driver. Remove the quarter inch screw driver,
allowing the idler arm to put tension on the belt.
24. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque screws to 55 ± 5 in-lbs. (6 ± 1 Nm).
g296175
25. Install the 1/4–20 inch taptite screw securing the frame cover to the frame.
Torque bolt to 110 ± 11 in-lbs. (12 ± 2 Nm).
Figure 220
Figure 221
Page 7–25 Deck: Service and Repairs