Toro TurfMaster HDX 22215 Service Manual page 156

Height-of-Cut Removal (continued)
Deck: Service and Repairs
g297057
15. Remove the 5/16–18 inch nut on carriage bolt securing the spring bracket
to the frame.
g297058
16. Using snap ring pillars, remove the snap ring retaining the pinion gear from
axle shaft.
Note: Inspect the pinion gear to wheel gear mesh for abnormal wear, broken
teeth, and uneven wear. Replace pinion gear to wheel gear mesh if needed.
Figure 229
Figure 230
Page 7–30 30 Inch TurfMaster® HDX WPM
3432-730 Rev A