Table of Contents
Advertisement
Traction Cable Installation (continued)
Controls: Service and Repairs
g297062
14. Install the 5/16–18 inch bolt securing the axle bearing housing to the axle
height-of-cut plate. Torque bolt to 160 ± 16 in-lbs. (18 ± 2 Nm).
15. Using snap ring pillars, install the snap ring retaining the pinion gear to axle
shaft.
g297059
16. Install the 5/16–18 inch nut on carriage bolt securing the spring bracket to the
frame. Torque nut to 115 ± 15 in-lbs. (13 ± 2 Nm).
Figure 90
Figure 91
Page 5–32
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
Advertisement
Chapters
Table of Contents
