Traction Cable Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g297057
17. Remove the mulch plug from the rear discharge.
18. Remove the 5/16–18 inch nut on carriage bolt securing the spring bracket
to the frame.
g297058
19. Using snap ring pillars, remove the snap ring retaining the pinion gear from
axle shaft.
Note: Inspect the pinion gear to wheel gear mesh for abnormal wear, broken
teeth, and uneven wear. Replace pinion gear and wheel gear, if needed.
Figure 60
Figure 61
Page 5–17
Controls: Service and Repairs