Table of Contents
Advertisement
Height-of-Cut Installation (continued)
Deck: Service and Repairs
g296175
33. Install the 1/4–20 inch taptite screw securing the frame cover to the frame.
Torque bolt to 110 ± 11 in-lbs. (12 ± 2 Nm).
g296174
34. Lower the rear cover.
35. Using an appropriate lifting device, lower the rear of the machine to the
ground.
36. Reinstall the cable guide.
Figure 277
Figure 278
Page 7–54
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
Advertisement
Chapters
Table of Contents
