Toro TurfMaster HDX 22215 Service Manual page 23

General Troubleshooting
Problem
Bent, crooked handle frame
Cracked or broken frame
Broken Bolts
Cracked blade spindle mounts on
deck
Broken spindle mounting bolts
Engine has poor running, no start
Weak drive
No drive
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
Possible Cause
Shipping damage, improper securing
while transporting
Damage from improper securing while
transporting the unit.
Vibration from the bent crank, damaged
or unbalanced blades.
Loose engine mounting bolts.
Operation with the engine guard.
Corrosion
Improper assembly torque
Striking debris while mowing
Striking debris while mowing
Fuel contamination, no fuel
Worn belt or pulley
Improper traction cable adjustment
Low engine RPM
Broken traction cable
Broken drive belt
Damaged pinion or wheel gears
Internal failure of transmission
Page 3–3
Corrective Action
Replace damaged components.
Replace the frame.
Replace the frame.
Replace the frame. Inspect the engine
for damage.
Unit needs to be operated with the
engine guard in place or may cause
cracked or broken frame.
Extract broken portion of bolt, and
repair threads when needed.
Extract broken portion of bolt, and
repair threads when needed.
Replace the deck, correct vibration.
Replace damaged components and
check for spindle bearing damage.
Consult the Operator's Manual for
basic troubleshooting. Engine support
through the engine manufacturer.
Replace the belt or pulley.
Adjust the cable properly.
Adjust engine RPM to proper engine
speed.
Replace the cable.
Replace the belt.
Replace the pinion gear and wheel
assembly.
Replace the transmission.
Troubleshooting: General Troubleshooting