Transmission Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
7. Rotate the belt tensioner arm by using a 7/16 inch socket on the nut at the
bottom side of the transmisison, turning clockwise.
g302330
8. To remove belt tension, align the idler pulley with the access hole on the
bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley
slot securing the pulley into position.
g296176
9. Remove the transmission belt from the engine pulley.
Note: Access belt from the front of the mower.
Figure 366
Figure 367
Page 8–7
Drive System: Service and Repairs