Toro TurfMaster HDX 22215 Service Manual page 157

Height-of-Cut Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g297059
17. Remove the 5/16–18 inch bolt securing the axle bearing housing to the axle
height-of-cut plate.
g297060
18. While holding up the spring loaded height-of-cut handle, apply pressure to the
back of the axle bearing housing assembly, separating from axle weldment.
Figure 231
Figure 232
Page 7–31 Deck: Service and Repairs