Toro TurfMaster HDX 22215 Service Manual page 84

Brake Cable Installation (continued)
Controls: Service and Repairs
5. Install the 1/4–20 taptite screw securing the transmission cable guide to
the frame.
g297062
6. Install the 1/4–20 inch shoulder bolt and 1/4–20 inch nylock nut securing
the cable to the parking brake lever. Torque bolt and nut to 75 ± 5 in-lbs.
(8 ± 1 Nm).
g298347
7. Tighten the 1/4–20 inch nut to the carriage bolt securing the cable to the
bracket. Torque bolt to 40 ± 7 ft-lbs. (4 ± 1 Nm). Adjust housing cable so
the machine rolls freely when parking brake is disengaged but stop machine
from rolling when engaged.
Figure 106
Figure 107
Page 5–40 30 Inch TurfMaster® HDX WPM
3432-730 Rev A