Toro TurfMaster HDX 22215 Service Manual page 168

Height-of-Cut Installation
Deck: Service and Repairs
1. Install the 2 (5/16–18 inch) bolts securing LH height-of-cut plate to the main
frame. Torque bolts to 160 ± 16 in-lbs. (18 ± 2 Nm).
g298696
2. Install the washer between the lever and plate.
3. Install the upper T-30 torx screw to the LH height adjuster handle. Torque
screw to 160 ± 16 in-lbs. (18 ± 2 Nm).
g298695
4. Install the height-of-cut adjustment spring.
Figure 253
Figure 254
Page 7–42 30 Inch TurfMaster® HDX WPM
3432-730 Rev A