Toro TurfMaster HDX 22215 Service Manual page 177

Height-of-Cut Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g297062
22. Using snap ring pillars, Install the snap ring retaining the pinion gear to axle
shaft.
g297059
23. Install the 5/16–18 inch nut on carriage bolt securing the spring bracket to the
frame. Torque nut to 115 ± 15 in-lbs. (13 ± 2 Nm).
Figure 271
Figure 272
Page 7–51 Deck: Service and Repairs