Short Message Stack - Kenwood NEXEDGE NX-200 Function Reference

12 FleetSync
12.7 Sending and Receiving a Short Message (Short Data Call)
The Alert Tone (Status/ Short Message Call) sounds from the
transceiver and then the Short Message will appear. The
message text is scrolled from right to left if the Short Message is
longer than 14 characters.
The received Short Message appears on the main display for 3
sec and ID Name appears for 2 sec alternately if "Alternate" is
configured for Message Display Type.
Configuration using KPG-111D/ DN
Configuring the Message Display Type (

Short Message Stack

Short Message Stack is used to store a Short Message in the stack memory. A maximum of 15 Short Messages can be
stored in the stack memory.
If a message is stored, the "
enters Stack Mode. (Refer to
Note
• A maximum of 15 messages (Status Messages and Short Messages) can be stored in the stack memory.
• This function is unavailable for NX-200S/ NX-300S.
Configuration using KPG-111D/ DN
Configuring the Short Message Stack (
FUNC (K)/Ver 4.00
See FPRG 8.16.2 General 1 Tab)
" icon blinks. In this case, a user can read the stored Short Message when the transceiver
3.7 Viewing the Receive History (Stack) on page
FPRG 8.10.6 Common Page 4 Tab)
See
Short Message Display (3 sec)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
ID Name Display (2 sec)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
38.)
CONTENTS INDEX 340