Kenwood NEXEDGE NX-200 Function Reference page 361

12 FleetSync
12.6 Sending and Receiving a Status Message (Status Call)
2
Press and hold the
The status entry display appears.
Pressing the Left key will also show the status entry display.
3
Enter a status.
Refer to Entering or Deleting a Code on page 48
methods.
 Using the PF keys
The characters can be selected by pressing the Up or Down
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or by
pressing the [ ] or [ ] key (Mobile), and the selected
characters can be determined by pressing the Menu ([
[*] key.
 Using the keypad
A code can be entered by pressing the [0] to [9] keys.
4
Press the Side 2 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), the
switch.
The transceiver sends the Status Message. Refer to Step 3 of "
Sending a Status Message by list selection" for the procedure on
how to cancel displays and transmission while the transceiver is
transmitting.
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Assigning functions to the Keypad Operation on the transceiver (
• Configuring the Manual Dialing to be enabled or disabled (
FUNC (K)/Ver 4.00
Menu ([ ]) or [*] key.
for entry
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
]) or
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Square
See FPRG 8.12 Key Assignment Window)
See FPRG 8.12.2 General Tab)
See FPRG 8.16.2 General 1 Tab)
CONTENTS
Mobile
Mobile
key (Mobile), or the PTT
INDEX 327