Displaying The Signal Strength (Signal Strength Indicator) - Kenwood NEXEDGE NX-200 Function Reference

5 INDICATION AND DISPLAY

5.7 Displaying the Signal Strength (Signal Strength Indicator)

5.7 Displaying the Signal Strength (Signal Strength Indicator)
Signal Strength Indicator can be used to display the signal strength of the received signal.
The RSSI icon indicating the signal strength appears in the following manner depending on the signal level of the received
signal.
Table 5-2 Signal Strength Indicator
Icons Status Signal Strength
High Above -80 dBm
Medium -95 dBm to -80 dBm
Low -110 dBm to -95 dBm
With a carrier
Very weak
less than -110 dBm
Disabled No signal No carrier
Blinking: Outside of the
communication area -
(NXDN Trunking System only)
Note
• The signal strength references are rough indicators of room temperature.
• This function is unavailable for NX-200S/ NX-300S.
Configuration using KPG-111D/ DN
Configuring the Signal Strength Indicator to be enabled or disabled ( See FPRG 8.10.1 Common Page 1 Tab)
FUNC (K)/Ver 4.00
CONTENTS INDEX 77