Kenwood NEXEDGE NX-200 Function Reference page 420

Hide thumbs Also See for NEXEDGE NX-200:
Table of Contents

Advertisement

15 GPS
15.1 GPS Functions
Configuration using KPG-111D/ DN
Configuring the GPS Message Type (
GPS Report on Data Zone-CH/GID
GPS Report on Data Zone-CH/GID allows the transceiver to automatically change the channel to a Data Zone-channel or
GID to send the GPS data.
The transceiver automatically changes the channel to Data Zone-channel or GID to send the GPS data. The transceiver
will restore the last Zone-channel or GID when the transmission ends. GPS Report on Data Zone-CH/GID can be used to
send data using a specific dedicated channel.
Note
This function is not available in an NXDN Trunking system.
Configuration using KPG-111D/ DN
Configuring the GPS Report on Data Zone-CH/GID to be enabled or disabled (
GPS Data Storage
GPS Data Storage allows the transceiver to store the GPS data in the VGS-1.
The transceiver stores the GPS data at the intervals configured for GPS Storage Interval. The stored GPS data can be
sent from the transceiver or can be read using a PC.
One message for GPS data is 36 bytes long. A maximum of 12288 messages can be stored in the VGS-1.
For instance, 12288/ (60 x 24) = 8.5333 if 1 min is configured for GPS Report Interval Time.
Messages for 8 days and 12 hours (204 hours) can be stored.
Configuration using KPG-111D/ DN
Configuring the GPS Data Storage (
Configuring the GPS Storage Interval (
GPS Report CH/GID
GPS Report CH/GID is the function that allows the transceiver to determine whether to use analog mode or NXDN digital
mode for automatic transmission of GPS data including polling on the data zone channel (or GID) in a Conventional Group.
For instance, along with the migration to a digital system, this function can be used when communicating by voice in digital
mode; however, still automatic transmission of the GPS data including polling needs to be done in analog mode, etc.
The transceiver behaves as follows depending on the configuration for GPS Report Channel/GID.
FUNC (K)/Ver 4.00
See
FPRG 8.11.4 GPS Tab)
See
FPRG 8.11.3 VGS-1 Tab)
See
FPRG 8.11.3 VGS-1 Tab)
See
FPRG 8.11.4 GPS Tab)
CONTENTS
INDEX
386

Advertisement

Table of Contents
loading

Table of Contents