Kenwood NEXEDGE NX-200 Function Reference page 330

11 LTR TRUNKING SYSTEM
11.6 Other LTR Functions
Operating the Transceiver
 Manual
1
Press the Menu ([
The Intercept Tone stops.
2
Release the PTT switch.
System Search starts from the next system following the system to which the transceiver failed to connect.
The transceiver stops searching if an available system is found.
3
Press the PTT switch.
The transceiver connects to the repeater on the system on which the system search stops and then the transceiver can initiate
a voice call.
 Auto
1
Release the PTT switch while the Intercept Tone sounds from the transceiver.
The Intercept Tone stops.
System Search starts from the next system following the system to which the transceiver failed to connect.
The transceiver stops searching if an available system is found.
2
Press the PTT switch.
The transceiver connects to the repeater on the system on which the system search stops and then the transceiver can initiate
a voice call.
Note
• If the transceiver cannot connect to the system, the transceiver will migrate to the next system and then continue the System Search.
In this case, System Search Tone will sound.
• If no system is found after searching all configured LTR zones, the System Search End Tone sounds and the System Search ends.
Configuration using KPG-111D/ DN
Configuring the System Search (
Notifying Difficulty by a Tone in Accessing the Repeater (Clear to Talk)
Clear to Talk can be used to emit the Delay Tone when the transceiver accesses a repeater for the third time or more by
pressing the PTT switch.
 If Clear to Talk is disabled:
After the PTT switch is pressed, a Delay Tone sounds from the transceiver if the transceiver attempts to connect to the
repeater 3 times or more.
If the repeater is busy when the PTT switch is pressed, a Busy Tone sounds from the transceiver .
 If Clear to Talk is enabled:
After the PTT switch is pressed, no Delay Tone sounds from the transceiver if the transceiver attempts to connect to the
repeater 3 times or more.
Even if the repeater is busy when the PTT switch is pressed, no Busy Tone sounds from the transceiver .
FUNC (K)/Ver 4.00
]) key while the Intercept Tone sounds from the transceiver.
See FPRG 8.11.2 LTR Tab)
CONTENTS INDEX 296