Kenwood NEXEDGE NX-200 Function Reference page 92

3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
 Entering characters using the microphone keypad
Following is the operation example to enter "KENWOOD" in Autodial Programming Mode.
Select "E".
Note
• Following are the main keys to be used for this operation examples.
To select a character: each key on the keypad
To determine: the Menu ([ ]) or [*] key
• Characters to be entered can be changed by configuring the Character Entry. (Refer to
FUNC (K)/Ver 4.00
Select "K".
Menu ([ ]) or
[*] key
Select "K".
Menu ([ ]) or
[*] key
Select "E".
[6] key
[5] key
[5] key
[3] key
[3] key
[6] key
[6] key
Character Entry on page
CONTENTS
62.)
INDEX 58