Kenwood NEXEDGE NX-200 Function Reference page 171

8 NXDN CONVENTIONAL SYSTEM
8.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Selcall on PTT (NXDN Conventional System) (
• Configuring the Unit ID corresponding to the Call 1 to Call 6 keys (
Receiving an Individual Call (Individual Call Acknowledge Request)
The transceiver being operated in an NXDN Conventional system can be on standby to receive an Individual Call on the
channel if "NXDN ID (Unit ID)" has been configured as the receiving Optional Signaling type.
The transceiver can receive an Individual Call if the received Unit ID matches the Unit ID (Own) preconfigured for the
transceiver.
To receive an Individual Call (Individual Call Acknowledge Request), the receiving transceiver must receive a message
requesting an acknowledgment from the transmitting transceiver. The transceiver becomes enabled for the communication
after the transmitting transceiver receives an acknowledgment message.
Operating the Transceiver
The transceiver's behavior varies depending on the configuration for Automatic Response.
 If Automatic Response is disabled:
1
Receive a message requesting an acknowledgment.
The transceiver sends an automatic response message to the
transmitting transceiver to notify that the transceiver has received
the message requesting an acknowledgment. An Alert Tone
(Paging) sounds from the transceiver, and "INCOMING" or the ID
for the transmitting transceiver alternately appears on the main
display every 1 sec.
FUNC (K)/Ver 4.00
See FPRG 8.12 Key Assignment Window)
See FPRG 8.3.3 Page 1 Tab)
See FPRG 8.12.8 Call Tab)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
INDEX 137