Kenwood NEXEDGE NX-200 Function Reference page 499

20 OPTIONAL BOARD
20.2 VGS-1
The recording start time and remaining time for recording appear
on the main display.
4
The transceiver on the transmitting side completes transmitting.
The transceiver stops recording. The transceiver also finishes
recording when the recording time elapses.
The audio data is written to the flash memory.
Note
If an error occurs in the VGS-1, "VGS ERROR" appears for 1
sec, and then Auto Reply Message is automatically disabled.
To record a message again on the recording channel on which
an error occurred, the recorded data of the recording channel
must be deleted using Message Playback. (Refer to
Back the Recorded Audio (Message Playback) on page
5
The transceiver finishes writing the message.
The number of messages newly recorded in Auto Reply Message
Mode appears.
FUNC (K)/Ver 4.00
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Playing
466.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Mobile
Mobile
CONTENTS INDEX 465