Kenwood NEXEDGE NX-200 Function Reference page 17

About Communications Systems
 Mixed Mode
Mixed mode is the mode to receive both an analog signal and an NXDN digital signal. To use this communication
mode, "Mixed" must be configured for Channel Type by using KPG-111D/ DN.
When transmitting in this mode, the transceiver transmits using the communication mode configured for Transmit Mode
(Analog or NXDN). However, the communication mode varies depending on the receiving status.
LTR Trunking System
In an LTR Trunking system, the transceiver can communicate by sending and receiving an LTR ID (Encode ID, Decode ID)
via a repeater.
To use the transceiver in an LTR Trunking system, various parameters for a GID, such as Encode ID and Decode ID, and
parameters for other various functions related to transmission and reception must be configured for a zone in the LTR
Trunking system by using KPG-111D/ DN. In addition, a repeater supporting an LTR Trunking system is required.
NXDN Trunking System
In an NXDN Trunking system, the transceiver can communicate by sending and receiving a Unit ID (or Group ID) via a
repeater.
To use the transceiver in an NXDN Trunking system, various parameters for a GID, such as Group ID, and parameters for
other various functions related to transmission and reception must be configured for a zone in the NXDN Trunking system
by using KPG-111D/ DN. In addition, a repeater supporting an NXDN Trunking system is required.
FUNC (K)/Ver 4.00
Analog Signal
Mixed Mode
Digital Signal
Repeater
LTR ID
LTR Trunking System
Repeater
Unit ID
(or Group ID)
NXDN Trunking System
Analog
Mode
Digital
Mode
LTR ID
LTR Trunking System
Unit ID
(or Group ID)
NXDN Trunking System
CONTENTS INDEX xv