Display Format; Power-On Text - Kenwood NEXEDGE NX-200 Function Reference

5 INDICATION AND DISPLAY
5.8 Display Functions of Main Display
Note
• If no Zone Name is configured, the zone number and channel or GID number appear on the main display.
• If Zone Name Display is enabled, the Zone Name appears immediately after the transceiver is turned ON regardless of whether the
zone is changed. If the Power-on Text is configured, Zone Name appears after the Power-on Text disappears.
Configuration using KPG-111D/ DN
Configuring Zone Name Display to be enable or disabled (

Display Format

Display Format can be used to display either Channel Name or GID Name on the main display, or both zone number and
channel or GID number appear at the same time.
Configuration
CH/GID Name
Zone-CH/GID Number
Pressing the Display Format key changes the display. Or, pressing the Menu key causes the transceiver to enter Menu
Mode, and then the display can be changed by selecting the "Display Format". (Refer to
23.)
Configuration using KPG-111D/ DN
• Configuring the Display Format (
• Assigning functions to the PF keys on the transceiver (

Power-on Text

Power-on Text can be used to display characters that appear during power-up.
If Power-on Text is configured, the configured characters appear for 2 sec during power-up.
The configured text appears on the main display if "Text" is configured for Message Type.
Example:
Power-on Text = "TRUCK 0123"
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
FUNC (K)/Ver 4.00
See
Table 5-4 Display Format
Channel Name or GID Name appears.
The zone number and channel or GID number appear.
See FPRG 8.10.1 Common Page 1 Tab)
See
FPRG 8.10.1 Common Page 1 Tab)
Description
3.4 Using Menu Mode on page
FPRG 8.12 Key Assignment Window)
Mobile
CONTENTS INDEX 79