Sending Gps Data Together With Emergency - Kenwood NEXEDGE NX-200 Function Reference

8 NXDN CONVENTIONAL SYSTEM
8.15 Sending GPS Data
Sending GPS Data Manually by Using a Key (Send the GPS Data)
GPS data can be sent manually by a user pressing the Send the GPS Data key. Or, pressing the Menu key causes the
transceiver to enter Menu Mode, and then the GPS data can be sent manually by selecting the "Send the GPS Data".
(Refer to 3.4 Using Menu Mode on page
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Sending GPS Data Together With Voice Communications (GPS Combination)
The transceiver can send GPS data by adding the GPS data to a signal while making voice calls.
To use this function, Voice Call for GPS Combination must be enabled by using KPG-111D/ DN.
Note
The GPS data added to a signal is sent to the ID configured for Base ID (GPS) or Base ID. To allow the receiving transceiver to receive
GPS combination data, the receiving transceiver must receive a call from the transmitting transceiver.
Configuration using KPG-111D/ DN
Configuring the GPS Combination (Voice Call) (
Sending GPS Data Together With Status Call (GPS Combination)
The transceiver can send GPS data by adding the GPS data to a Status Message using NXDN.
To use this function, Status for GPS Combination must be enabled by using KPG-111D/ DN. The range of status numbers
to which GPS data can be added can be configured.
Note
The GPS data added to a Status Message is sent to the ID configured for Base ID (GPS) or Base ID. To allow the receiving transceiver
to receive GPS combination data, the receiving transceiver must receive a call from the transmitting transceiver.
Configuration using KPG-111D/ DN
• Configuring the GPS Combination (Status) (
• Configuring the GPS Report Status Number Block (
Sending GPS Data Together With Emergency Call (GPS Combination)
The transceiver can send GPS data by adding the GPS data to the Emergency Status (Status 224 and Status 225).
To use this function, Emergency for GPS Combination must be enabled by using KPG-111D/ DN.
Note
The GPS data added to the Emergency Status is sent to the ID configured for Base ID (GPS) or Base ID. To allow the receiving
transceiver to receive GPS combination data, the receiving transceiver must receive a call from the transmitting transceiver.
FUNC (K)/Ver 4.00
23.)
FPRG 8.12 Key Assignment Window)
See
FPRG 8.19.10 GPS Tab)
See
FPRG 8.19.10 GPS Tab)
See
FPRG 8.19.10 GPS Tab)
See
CONTENTS INDEX 181