Kenwood NEXEDGE NX-200 Function Reference page 567

APPENDIX
Key Operations for Each Mode
Editing a DTMF Code (editing a
list)
Key
Selects a DTMF code by changing the DTMF codes one at a time.
Press
Up/ Down
Selects a DTMF code by changing from one code to another
Hold
continuously.
Down
Side 1 Press
Side 2 Press
Determines all the DTMF codes, or a DTMF code if the code is
Menu ([ ]) Press currently selected.
Deletes one digit, or restores the DTMF Name entry display if no DTMF
Press code is entered.
Back
Hold Deletes all digits.
Down
Press
Left
Hold
Down
Press
Right/Home
Hold
Down
[0] to [9] Press
If the * and # key-entry Pattern is enabled:
Determines the DTMF code if the DTMF code is currently selected. Or,
the transceiver migrates to DTMF code entry mode, and then pressing
Press
the [*] or [#] key subsequently enters "*" or "#".
If the * and # key-entry Pattern is disabled:
[*]
Enters "*".
If the * and # key-entry Pattern is enabled:
Hold
Migrates to the DTMF code entry mode. Then, pressing the [2], [5], [8]
Down
or [0] key enters "A", "B", "C", or "D" respectively.
If the * and # key-entry Pattern is enabled:
Deletes one digit, or restores the DTMF Name entry display if no DTMF
code is entered.
Press
Deletes all digits.
[#]
If the * and # key-entry Pattern is disabled:
Enters "#".
Hold If the * and # key-entry Pattern is enabled:
Down Deletes all digits.
PTT switch Press
FUNC (K)/Ver 4.00
Autodial Programming
Editing a DTMF Code (adding a
list)
Aborts the current mode.
-
-
-
Aborts the current mode.
-
Enters a DTMF code.
Transmits after aborting the current mode.
Editing a DTMF Name (adding a
list)
Selects a character by changing
one character at a time.
Selects a character by changing
from one character to another
continuously.
-
Determines the DTMF Name or
determines the character if a
character is selected.
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
- Shifts the cursor to the left.
Shifts the cursor to the left
-
continuously.
Shifts the cursor to the right.
Shifts the cursor to the right
-
continuously.
Enters characters.
Determines the DTMF Name or
determines the character if a
character is selected.
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
CONTENTS
-
-
INDEX 533